|
| MOQ: | 1 unit |
| Price: | USD 150,000 - USD 180,000/ unit |
| Standard Packaging: | Nude Packing if CBU, Wooden Case + Pallet + Steel Frame + Carton if SKD or CKD |
| Delivery Period: | 60 Working days |
| Payment Method: | L/C, T/T |
| Supply Capacity: | 3,000 Units per Year |
Longer Range Strong Power Electric Bus TEG6125BEV Maximum 105 Passengers
Vehicle Advantage:
Ⅰ:Large space
The wheelbase length is 5.9 meters and the maximum passenger capacity is 105.
Ⅱ:Strong power, longer range
Battery capacity 338.4 kWh, maximum range up to 641Km. Dual-winding electric drive system, peak torque up to 3300N-m, strong power system, high reliability; energy storage management system, using automotive-grade components selection, accurate prediction of battery status.
Ⅲ:Detailed Control, More Comfortable Drive and Ride
1. Built-in sliding window, transparent rear windshield, good lighting performance.
2. Configurable first-class step, ECAS, minimum 260mm body "side kneeling" entrance, convenient for the disabled to get on and off the ride.
3. Passenger door intimate handrail setting, flip step setting, easy to get on and off the car for passengers with limited mobility.
4. Driving area can be equipped with 10-inch large screen, information at a glance.
5. The driver's seat is equipped with USB charging port, cell phone storage box, cup holder, etc. to optimize the driver's riding comfort.
Ⅳ:Multiple technologies to ensure vehicle safety
1. Remote vehicle control
2. One-key diagnosis
3. Intelligent maintenance
4. Forward collision warning system
5. Lane Departure Warning
6. Automatic Emergency Braking
7. Pedestrian Collision Warning
8. Passive Collision Safety
9. Environmental Adaptation
10. 24-hour multi-dimensional safety monitoring and safety warning technology
Ⅴ:Segmented design for easy maintenance
The front and rear of the model adopt a segmented design, which facilitates access to the interior parts of the front and rear compartments and the use of the trailer hitch.
Ⅵ:Lightweight design, more energy efficient
Lightweight design, body weight reduction of 200KG, braking energy recovery of more than 40%.
Model TEG6125BEV Technical Parameters
|
Model TEG6125BEV Technical Parameters
|
||
| Basic parameters |
Overall dimension(mm)
|
11950×2540×3280
|
|
Passenger capacity (number of seats)
|
43
|
|
|
Approach angle(°)
|
7
|
|
| Departure angle(°) | 7 | |
|
Electric drive and control system
|
Drive motor
|
Permanent magnet synchronous motor, power:100/200(kW)
|
|
Energy storage device
|
Lithium iron phosphate battery :3 15.07 ,338.4kWh;
|
|
|
Motor controller
|
Integrated controller
|
|
|
chassis
|
suspension
|
Air suspension,front 2 and rear 4 airbags
|
|
Front axle
|
7.5T, disc type
|
|
|
Rear axle (axle)
|
13T,disc/drum
|
|
|
tyre
|
11R 22.5 ,18levels
|
|
|
Rim
|
eight point two five × 22.5 ; Steel (optional:aluminumalloy)
|
|
|
braking system
|
With energy storage spring braking, electric transmission auxiliary braking,
ABS anti lock, dual circuit air braking
|
|
| Body |
Passenger door
|
Pneumatic, aluminumalloy,front double back double inner swing (three or four doors are optional)
|
|
Surrounded by drivers
|
Aluminum alloy full enclosure
|
|
|
Handrail
|
Plastic coated steel pipe, diameter 32mm, yellow(optional:aluminum alloy,
stainless steel)
|
|
|
Air duct
|
Foam air duct (optional : panoramic aluminum alloy air duct)
|
|
|
electrical
|
Air conditioner model
|
Cooling and heating electric air conditioner, cooling capacity 32000 kcal
|
|
Defrosting system
|
With driver's area air outlet, high voltage electric defroster 4kw
|
|
|
Other configurations
|
Cathodic electrophoresis, full load body,24H safety monitoring system
|
|
Detail Pictures:
Company profile
CHONGQING BIG SCIENCE & TECHNOLOGY DEVELOPMENT CO., LIMITED, We are a well-known international auto manffacturer and oversea auto investment corporation in China. Our mission is to focus on overseas investment in automotive assembly plant chain projects.Our investments include capital and automotive manufacturing technology, brands, key equipment,kit car spare parts and credit support under guarantee conditions.We are a joint venture corporation control by China national automobile corporation and China financial capital investment corporation.The Chinese government has proposed "One Belt And One Road".Chinese carmakers are keen to "go global".While helping developing countries to achieve industrialization, we should also develop ourselves.http://chainautoassembly.com is also another official site of ours.
Advantages of Our Cooperation on Auto Assembly Project
1.Technological advantage: China has become the No.1 auto manufacturing country in the world since 2009, and automobile manufacturing technology has been very mature. Especially the new energy automobile science and technology level is in the world leading position.
2010, China became the largest manufacturer of automobiles in the world.
2016 Chinese auto production about 28 millions units > Japanese cars production + U.S. auto production + Korea auto production
2016, the production of new energy vehicles in China was 700,000, the world's largest, surpassing the total output of new energy vehicles in all other countries .
2017, the production of new energy vehicles in China was 860,000, the world's largest, surpassing the total output of new energy vehicles in all other countries .
2018, the Chinese government released latest news that electric vehicle manufacturing standard is higher than Europe standard.
2.Cost advantage: we are the automobile manufacturing group, the overseas chain operation scale advantage makes the KD parts we offer have higher cost performance ratio.Plus cost savings of difference of importing tariff between CBU and CKD gives our final product absolute competitive advantage.
3.Capital advantage: Auto Manufacturing Group + Capital Group provides sufficient investment funds for overseas chain operations. China's huge capital strength, and the Chinese government's national strategy of Belt and Road, provide a guarantee of sustainable growth for overseas chain auto assembly plant projects . With the development of parts localization, the industrialization of the project country will be greatly improved; this is a national win-win strategy.
4.Operational advantage: Over the past 10 years, eight overseas joint ventures have been successfully managed and operated. Our overseas joint venture projects include:
1)Syria A&B auto plant;
2)Ghana MKC Auto Co.,Ltd;
3)Angola ATJ-JinBei Auto Co.,Ltd;
4)Eastern Vehicle Co.,Ltd;
5)South Asia Brilliant auto plant;
6)Middle east Brilliance-Bavarian motor Ltd;
8)Mozambique bus assembly plant;
5.Highly efficient, customized investment mode:Refined investment schemes tailored to local conditions make it possible for highly capitalized, high-tech automotive manufacturing projects to be available in developing countries; our core competitiveness include: under the win-win principle, we actually provide manufacturing technology, invest in critical equipment, train local workers, transfer manufacturing technology, and provide guaranteed financial credit support. According to the actual situation of the project, provide the customized project implementation plan (step by step, decompose the big goal into several small tasks that can be implemented step by step).
6.Excellent win-win cooperation mode:Portfolio of complementary advantages: China invests in technologies that are not available locally, key facilities; local investors have land, plant, general equipment and liquidity.
Cooperation to make up for each others weakness : China is good at production management, technical advantages, local partners are familiar with the local market, government network.
Local partner holding majority can fully mobilize the work enthusiasm of the partner.
Local partner holding majority can be regarded as national industry, easier to obtain government preferential policy support and government orders. It is easier to get more support from banks and consumers, and the joint factory will be identified as national industry; it will be easier and better to run complex social relationships that are conducive to the development of enterprises.
In short, only unity of interests results in cooperation cohesion and win-win cooperation can have sustainable growth.
7.The profiting mode of the KD assembly plant project is to make effective use of the tariff difference and freight between CBU and KD parts, and combine with the subsidy policy of local government industrial development to produce the products which are good and cheap and meet the needs of the market.
Quantification of profit sources:
A. Chinese cars have the highest cost performance ratio and very strong market competitiveness. (the advantage is about 20-30%)
B.By importing CKD, you can save tariffs and freight compared to the CBU term.-SKD/CKD terms compared to the CBU terms, import tariffs have a 25-35% difference. (25-35%) Price advantage
C.With SKD/CKD, you can ship more goods than CBU, saving freight. (cost savings 5-10%)
D.When you develop the market, there are 4S stores and our technology supply, and you can provide good after-sales service. Parts trade is a new profit growth point. Generally speaking, it accounts for about 20-30% of the total value. (20-30%)
E.You can use your own brand for the car, which is an intangible asset. (total value over50% ) We provide technical support and credit.
Video
Video
|
|
| MOQ: | 1 unit |
| Price: | USD 150,000 - USD 180,000/ unit |
| Standard Packaging: | Nude Packing if CBU, Wooden Case + Pallet + Steel Frame + Carton if SKD or CKD |
| Delivery Period: | 60 Working days |
| Payment Method: | L/C, T/T |
| Supply Capacity: | 3,000 Units per Year |
Longer Range Strong Power Electric Bus TEG6125BEV Maximum 105 Passengers
Vehicle Advantage:
Ⅰ:Large space
The wheelbase length is 5.9 meters and the maximum passenger capacity is 105.
Ⅱ:Strong power, longer range
Battery capacity 338.4 kWh, maximum range up to 641Km. Dual-winding electric drive system, peak torque up to 3300N-m, strong power system, high reliability; energy storage management system, using automotive-grade components selection, accurate prediction of battery status.
Ⅲ:Detailed Control, More Comfortable Drive and Ride
1. Built-in sliding window, transparent rear windshield, good lighting performance.
2. Configurable first-class step, ECAS, minimum 260mm body "side kneeling" entrance, convenient for the disabled to get on and off the ride.
3. Passenger door intimate handrail setting, flip step setting, easy to get on and off the car for passengers with limited mobility.
4. Driving area can be equipped with 10-inch large screen, information at a glance.
5. The driver's seat is equipped with USB charging port, cell phone storage box, cup holder, etc. to optimize the driver's riding comfort.
Ⅳ:Multiple technologies to ensure vehicle safety
1. Remote vehicle control
2. One-key diagnosis
3. Intelligent maintenance
4. Forward collision warning system
5. Lane Departure Warning
6. Automatic Emergency Braking
7. Pedestrian Collision Warning
8. Passive Collision Safety
9. Environmental Adaptation
10. 24-hour multi-dimensional safety monitoring and safety warning technology
Ⅴ:Segmented design for easy maintenance
The front and rear of the model adopt a segmented design, which facilitates access to the interior parts of the front and rear compartments and the use of the trailer hitch.
Ⅵ:Lightweight design, more energy efficient
Lightweight design, body weight reduction of 200KG, braking energy recovery of more than 40%.
Model TEG6125BEV Technical Parameters
|
Model TEG6125BEV Technical Parameters
|
||
| Basic parameters |
Overall dimension(mm)
|
11950×2540×3280
|
|
Passenger capacity (number of seats)
|
43
|
|
|
Approach angle(°)
|
7
|
|
| Departure angle(°) | 7 | |
|
Electric drive and control system
|
Drive motor
|
Permanent magnet synchronous motor, power:100/200(kW)
|
|
Energy storage device
|
Lithium iron phosphate battery :3 15.07 ,338.4kWh;
|
|
|
Motor controller
|
Integrated controller
|
|
|
chassis
|
suspension
|
Air suspension,front 2 and rear 4 airbags
|
|
Front axle
|
7.5T, disc type
|
|
|
Rear axle (axle)
|
13T,disc/drum
|
|
|
tyre
|
11R 22.5 ,18levels
|
|
|
Rim
|
eight point two five × 22.5 ; Steel (optional:aluminumalloy)
|
|
|
braking system
|
With energy storage spring braking, electric transmission auxiliary braking,
ABS anti lock, dual circuit air braking
|
|
| Body |
Passenger door
|
Pneumatic, aluminumalloy,front double back double inner swing (three or four doors are optional)
|
|
Surrounded by drivers
|
Aluminum alloy full enclosure
|
|
|
Handrail
|
Plastic coated steel pipe, diameter 32mm, yellow(optional:aluminum alloy,
stainless steel)
|
|
|
Air duct
|
Foam air duct (optional : panoramic aluminum alloy air duct)
|
|
|
electrical
|
Air conditioner model
|
Cooling and heating electric air conditioner, cooling capacity 32000 kcal
|
|
Defrosting system
|
With driver's area air outlet, high voltage electric defroster 4kw
|
|
|
Other configurations
|
Cathodic electrophoresis, full load body,24H safety monitoring system
|
|
Detail Pictures:
Company profile
CHONGQING BIG SCIENCE & TECHNOLOGY DEVELOPMENT CO., LIMITED, We are a well-known international auto manffacturer and oversea auto investment corporation in China. Our mission is to focus on overseas investment in automotive assembly plant chain projects.Our investments include capital and automotive manufacturing technology, brands, key equipment,kit car spare parts and credit support under guarantee conditions.We are a joint venture corporation control by China national automobile corporation and China financial capital investment corporation.The Chinese government has proposed "One Belt And One Road".Chinese carmakers are keen to "go global".While helping developing countries to achieve industrialization, we should also develop ourselves.http://chainautoassembly.com is also another official site of ours.
Advantages of Our Cooperation on Auto Assembly Project
1.Technological advantage: China has become the No.1 auto manufacturing country in the world since 2009, and automobile manufacturing technology has been very mature. Especially the new energy automobile science and technology level is in the world leading position.
2010, China became the largest manufacturer of automobiles in the world.
2016 Chinese auto production about 28 millions units > Japanese cars production + U.S. auto production + Korea auto production
2016, the production of new energy vehicles in China was 700,000, the world's largest, surpassing the total output of new energy vehicles in all other countries .
2017, the production of new energy vehicles in China was 860,000, the world's largest, surpassing the total output of new energy vehicles in all other countries .
2018, the Chinese government released latest news that electric vehicle manufacturing standard is higher than Europe standard.
2.Cost advantage: we are the automobile manufacturing group, the overseas chain operation scale advantage makes the KD parts we offer have higher cost performance ratio.Plus cost savings of difference of importing tariff between CBU and CKD gives our final product absolute competitive advantage.
3.Capital advantage: Auto Manufacturing Group + Capital Group provides sufficient investment funds for overseas chain operations. China's huge capital strength, and the Chinese government's national strategy of Belt and Road, provide a guarantee of sustainable growth for overseas chain auto assembly plant projects . With the development of parts localization, the industrialization of the project country will be greatly improved; this is a national win-win strategy.
4.Operational advantage: Over the past 10 years, eight overseas joint ventures have been successfully managed and operated. Our overseas joint venture projects include:
1)Syria A&B auto plant;
2)Ghana MKC Auto Co.,Ltd;
3)Angola ATJ-JinBei Auto Co.,Ltd;
4)Eastern Vehicle Co.,Ltd;
5)South Asia Brilliant auto plant;
6)Middle east Brilliance-Bavarian motor Ltd;
8)Mozambique bus assembly plant;
5.Highly efficient, customized investment mode:Refined investment schemes tailored to local conditions make it possible for highly capitalized, high-tech automotive manufacturing projects to be available in developing countries; our core competitiveness include: under the win-win principle, we actually provide manufacturing technology, invest in critical equipment, train local workers, transfer manufacturing technology, and provide guaranteed financial credit support. According to the actual situation of the project, provide the customized project implementation plan (step by step, decompose the big goal into several small tasks that can be implemented step by step).
6.Excellent win-win cooperation mode:Portfolio of complementary advantages: China invests in technologies that are not available locally, key facilities; local investors have land, plant, general equipment and liquidity.
Cooperation to make up for each others weakness : China is good at production management, technical advantages, local partners are familiar with the local market, government network.
Local partner holding majority can fully mobilize the work enthusiasm of the partner.
Local partner holding majority can be regarded as national industry, easier to obtain government preferential policy support and government orders. It is easier to get more support from banks and consumers, and the joint factory will be identified as national industry; it will be easier and better to run complex social relationships that are conducive to the development of enterprises.
In short, only unity of interests results in cooperation cohesion and win-win cooperation can have sustainable growth.
7.The profiting mode of the KD assembly plant project is to make effective use of the tariff difference and freight between CBU and KD parts, and combine with the subsidy policy of local government industrial development to produce the products which are good and cheap and meet the needs of the market.
Quantification of profit sources:
A. Chinese cars have the highest cost performance ratio and very strong market competitiveness. (the advantage is about 20-30%)
B.By importing CKD, you can save tariffs and freight compared to the CBU term.-SKD/CKD terms compared to the CBU terms, import tariffs have a 25-35% difference. (25-35%) Price advantage
C.With SKD/CKD, you can ship more goods than CBU, saving freight. (cost savings 5-10%)
D.When you develop the market, there are 4S stores and our technology supply, and you can provide good after-sales service. Parts trade is a new profit growth point. Generally speaking, it accounts for about 20-30% of the total value. (20-30%)
E.You can use your own brand for the car, which is an intangible asset. (total value over50% ) We provide technical support and credit.
